Polaris XCR800 '99-'03

 

 
180 HP Kit  "The Ultimate Trail Kit"
$595.00 HTG Triple Pipes (uses stock silencer)....+10 HP
$600.00 Dynoport Triple Pipes (uses stock silencer)....+10 HP
$239.00 Dynoport or HTG Silencer
$305.00 Cylinder Shim Kit & Head set....+8 HP
Requires your stock heads to be sent to MCB for machining
$289.00 V-Force Delta III Reeds....+5 to 6 HP
$174.95 MCB Clutch Kit (weights,helix,springs)...Option #1
$38.00 Clutching Option #2 (includes weights only)
This clutching option is not as aggressive than MCB's complete clutch kit.
$374.00 Team Performance Solutions "Rapid Reaction" Roller Secondary
Price includes base clutch and clutch kit, ready to bolt-on.
   

$1200.00		 Total as sold separately (Option #2 clutching and no silencer)........$1247.95
SPECIAL  180 HP Kit....All items sold as a package
Completely trail-friendly; it truely is "the Ultimate".
 
   
Other MCB Recommendations
$275.00

MCB Moly-Coated OEM-Style Piston Kit
All MCB pistons are MOS2 coated; proven to be the best for durability and lubricity.  The piston material is high silicone content to give the necessary hardness that aluminum pistons need.  The piston-tops are hard anodized for heat resistance and to minimize piston expansion/contraction; this combined with the coating virtually eliminates the possibility of cold seizure.  All pistons are EXACT OEM dimensions and mass, including ring grooves (we actually use OEM rings).  These pistons offer equal or BETTER than OEM performance at significantly less cost.  All kits include everything necessary to rebuild your sled.  Pistons, rings, wrist pins, circlips, and a complete gasket kit.
$239.00 Dynoport Silencer....9 lbs weight savings & adds throttle response
$270.95 MBRP Silencer
$525.00
($165.00 Bottle-only)		 Holtzman Nitrous (NOS) Kit
45 instant HP!! NOS airbox-injected for safe and reliable HP.  Bottle pressure is not determined by bottle-temperature.  Constant pressure at all times.  Fuel Jets $20.00 each, specify Carb or EFI.
$159.00 Holtzman Engineering Tempaflow II
Automatic jetting compensation for temperature; the equivalent to Ski Doo's DPM unit, see carburetor section for further explanation.
$150.00 Holtzman Engineering Variflow Multi-Range
Manual jetting adjustment tunable from the handlebar for altitude changes.  Great for RMK's and SKS's without ACCS.
$210.00 Holtzman ATAAC....Temperature and Altitude automatic compensation all-in-one
$50.00 A.D. Boivin Quick Coupling Adjuster
 Allows you to adjust your coupling blocks in  seconds with your spark plug wrench so you can go from optimum settings for
drag racing, to optimum settings for trail riding in seconds on the trail.
$18.00 NGK BR9ES or BPR9ES Spark Plugs....Box of 10
$3.50 ea Champion RN57YC or RN57YCC
   
Drive belts and Oils
$64.95 Polaris OEM Drive Belt....P/N 3211080
$54.95 Polaris OEM Drive Belt....P/N 3211075
$33.00 Amsoil Dominator Oil (Gallon)
$29.00 Amsoil Interceptor Oil (Gallon)
$26.00 Amsoil HP Injector Oil (Gallon)
   
Traction and Control (Carbide Runners and Studs) 
$69.95 Stud Boy Carbide Runners….9" G-Force  P/N 2140-00....(fits all Polaris OEM plastic skis)
$49.95 Stud Boy Carbide Runners….6" Switch-Back  P/N 2139-00
$69.95 Stud Boy Shaper Carbide Runners....6"
$79.95 Stud Boy Shaper Carbide Runners....7.5"
$89.95 Stud Boy Shaper Carbide Runners....9"
$89.00 Stud Boy "Deuce" Bar, Dual-Runners....4.5"
$99.00 Stud Boy "Deuce" Bar, Dual-Runners....6.5"
$140.00 Stud Boy "Deuce" Bar, Dual-Runners....9"
   
$1.40 ea Stud Boy 'SPT' or Woody's 'Excel' carbide studs w/ standard aluminum backer (complete)
$1.50 ea Stud Boy 'SPT' or Woody's 'Excel' carbide studs with 'Power Plate' backer (complete)
$1.08 ea Stud Boy 'SPT' or Woody's Excel' carbide studs (studs & nuts only)
$1.75 ea Stud Boy 'Power Point' Studs with standard aluminum backers (complete)
$1.85 ea Stud Boy 'Power Point' Studs with 'Power Plate' backers (complete)
$1.50 ea Stud Boy 'Power Point' Studs (studs and nuts only)
   
$1.60 ea Woody's 'Traction Master' Studs (stud & nut only)
$1.85 ea Woody's 'Traction Master' Studs with standard aluminum backer
$1.95 ea Woody's 'Traction Master' Studs with 'Power Plate' backer
$1.32 ea Woody's 'Mega Bite' Studs (stud & nut only)
$1.62 ea Woody's 'Mega Bite' Studs with standard aluminum backer
$1.72 ea Woody's 'Mega Bite' Studs with 'Power Plate' backer
(call) Stainless Steel Studs Available
$.40 ea Stud Boy 'Power Plate' backers (backers only, natural color)
Colored 'Power Plate' aluminum backers also available in Blue/Green/Red/Purple....add $.35 over natural-colored Power Plate

SPT's and Excel's come in .875" / 1.00" / 1.075" / 1.080" & (1.175" in Woody's only)
PowerPoints and Traction Master studs come in .875" / 1.00" / 1.075" / 1.080" / 1.175" / 1.187" / 1.325" / 1.5" / 1.625" / 1.750" sizes.

 See traction page for other Stainless Steel Studs, Ice Pixx, Assassains, Catapults, Chisels or Woody's Studs.

Studding Notes:  MCB recommends the 'Power Point' with the 'Power Plate' for all applications over 90HP. These studs have better penetration than the 'SPT' or 'Excel' stud.  MCB recommends the 'Power Plate' backer for any application over 1.08" in length regardless of HP. The 'Power Plate' gives the stud much better support than the standard aluminum backer, less deflection results in less stress & potential tearing of your track.

* For large volume orders of performance parts and/or traction products, further DISCOUNTS can be given on most items.  Call us and we'll make you the best deal !

Back to Home Page