MCB Performance Polaris XC600 SP and RMK600 Snowmobile Performance Parts 1998 1999 2000 2001 2002

Polaris XC 600 SP

Pro-X / SKS / RMK '98-'05

Click Here to see our Dynojet graph of a '00 VES 600 track dyno tested

with Twin Pipes and clutching changes.

All the above pipe manufacturers make good quality pipes with honest HP ratings.

Each offers something a little different from the next; Call for details of differences.

SPT's and Excel's come in .875" / 1.00" / 1.075" / 1.080" & (1.175" in Woody's only)
PowerPoints and Traction Master studs come in .875" / 1.00" / 1.075" / 1.080" / 1.175" / 1.187" / 1.325" / 1.5" / 1.625" / 1.750" sizes.

See traction page for other Stainless Steel Studs, Ice Pixx, Assassains, Catapults, Chisels or Woody's Studs.

Studding Notes: MCB recommends the 'Power Point' with the 'Power Plate' for all applications over 90HP. These studs have better penetration than the 'SPT' or 'Excel' stud. MCB recommends the 'Power Plate' backer for any application over 1.08" in length regardless of HP. The 'Power Plate' gives the stud much better support than the standard aluminum backer, less deflection results in less stress & potential tearing of your track.

* For large volume orders of performance parts and/or traction products, further DISCOUNTS can be given on most items. Call us and we'll make you the best deal !

Exhaust Systems
$610.00	SLP Twin Pipes....Pro-X VES, P/N 09-632....+10 HP
$610.00	SLP Twin Pipes....2000-2005 Edge VES, P/N 09-621.
$625.00	SLP Twin Pipes....2002-2005 RMK Edge, P/N 09-631.
$555.00	Dynoport Twin Pipes....('98 / '00-05 VES)....124 HP @ 8100rpm
$495.00	Hot-To-Go Twin Pipes (uses stock canister)....124 HP
$595.00	HTG Twin Pipes (with HTG canister)....124 HP
Click Here to see our Dynojet graph of a '00 VES 600 track dyno tested with Twin Pipes and clutching changes. All the above pipe manufacturers make good quality pipes with honest HP ratings. Each offers something a little different from the next; Call for details of differences.
$479.00	SLP Single Pipe....+9 HP, 6 lbs weight reduction Big block only. Includes Y-Pipe, Pipe, and Silencer '98 XC / RMK big block....P/N 09-718 '99 XC / RMK big block....P/N 09-719 '00-01 XC / RMK600....P/N 09-725
$219.95	SLP Silencer....-3 to -8 lbs depends on year (ceramic coated)
$249.00	MBRP Silencer....-8 lbs Stainless Steel

Clutch Kits
$279.00	Team Performance Solutions "Rapid Reaction" Roller Secondary Clutch
$149.00	Team Performance Solutions "Rapid Reaction" Clutch Kits Includes spring(s), twin-trax helix, instructions, weights (if necessary). 600 RMK Kit.....$165.00
$265.95	MCB / Redline HeelClicker Clutch Kit, w/ helix & spring Dyno-developed and trail-tested! Excellent holeshots and quick backshifting, with improvement in midrange and top-end HP. +4 Peak track HP, with gains in midrange and top-end horsepower of up to +11 track hp! Small-block VES only.
$179.95	MCB Trailmaster conventional Clutch Kit....includes weights, buttons, springs, & helix Specify year when ordering.
$189.95	Hot Seat clutch kit
$209.95	Goodwin clutch kit
$169.00	Erlandson EPI clutch kit
$179.95	MCB Grass Drag Clutch Kit....includes weights, buttons, springs, & helix Dyno-developed for maximum horsepower gains, at the sacrafice of poor backshifting. Trail-riding with this setup is NOT RECOMMENDED. Incredible holeshots with awesome pull at top-end. +5 Peak track HP, with gains in midrange and top-end horsepower of up to +13 track hp!

Engine and Intake
$19.95	SLP Flow-Rite Air Vent
$39.95	SLP Airhorn Kit An easy 3 HP gain with this mod combined with the Air-vents
$269.00	Big Block Billet Head Sets....SLP or Hot Seat........Cheater Style....+5 HP gain Specify altitude - 0-3000, 3000-6000, 6000-9000 ft. Big Block motors ONLY.
$279.00	Small Block Billet Head Sets....HTG or Hot Seat....Cheater Style....+4 HP gain Specify altitude - 0-3000, 3000-6000, 6000-9000 ft. Small Block VES motors ONLY.
$425.00	Twin Cylinder Porting....+4 HP Porting requires 2-3 weeks turnaround time.
$34.95	Boost Bottle These balance tubes help synchronize your carbs and reed valve timing, helps smooth out idle and low speed fuel circuit, minor improvement in fuel mileage, and better throttle response. P/N 22-52 00-05 small block VES P/N 22-42 98-99 big block
$225.95	V-Force Delta III Reeds Up to +3 HP on VES small block. +4 HP on Big Block. P/N V3S-130-2
$58.95	SLP Power Paks....for Keihen Carbs only SLP Power Paks are applicable for '98-'99 big-block XC600 owners with 39mm Keihen D-slide Carbs. Provides explosive / violent throttle response. Easy installation to the carbs; allows it to perform like a 20mm, 30mm, and 39mm carb, all in one.

Other MCB Recommendations
$250.00	MCB Moly-Coated OEM-Style Piston Kit All MCB pistons are MOS2 coated; proven to be the best for durability and lubricity. The piston material is high silicone content to give the necessary hardness that aluminum pistons need. The piston-tops are hard anodized for heat resistance and to minimize piston expansion/contraction; this combined with the coating virtually eliminates the possibility of cold seizure. All pistons are EXACT OEM dimensions and mass, including ring grooves (we actually use OEM rings). These pistons offer equal or BETTER than OEM performance at significantly less cost. All kits include everything necessary to rebuild your sled. Pistons, rings, wrist pins, circlips, and a complete gasket kit.
$159.00	Holtzman Engineering Tempaflow II Automatic jetting compensation for temperature; the equivalent to Ski Doo's DPM unit, see carburetor section for further explanation.
$150.00	Holtzman Engineering Variflow Multi-Range Manual jetting adjustment tunable from the handlebar for altitude changes. Great for RMK's and SKS's without ACCS.
$210.00	Holtzman ATAAC....Temperature and Altitude automatic compensation all-in-one
$119.00	A.D. Boivin EDGE 3-in-1 Chassis Kit This kit improves ergonomics and overall handling of your Polaris EDGE-chassis sled. Kit includes 1) Lower control rod repositioning brackets, reducing body roll, 2) RRSS quick-adjust blocks, and 3) Handlebar riser and offset positioning bracket.
$59.95	A.D. Boivin Front-End Kit Includes the Control-Rod repositioning brackets, providing significantly less body roll, and improving cornering to "go-kart" type handling.
$50.00	A.D. Boivin Quick Coupler (Xtra-10 skidframes only)
$99.95	MBRP Engine Torque Rod
$18.00	NGK BR9ES or BPR9ES Spark Plugs....Box of 10
$3.50 ea	Champion RN57YC or RN57YCC

Drive belts and Oils
$54.95	Polaris OEM Drive Belt....P/N 3211065
$54.95	Polaris OEM Drive Belt....P/N 3211075
$33.00	Amsoil Dominator Oil (Gallon)
$29.00	Amsoil Interceptor Oil (Gallon)
$26.00	Amsoil HP Injector Oil (Gallon)

Traction and Control (Carbide Runners and Studs)
$69.95	Stud Boy Carbide Runners�.9" G-Force P/N 2140-00....(fits all Polaris OEM plastic skis)
$49.95	Stud Boy Carbide Runners�.6" Switch-Back P/N 2139-00
$69.95	Stud Boy Shaper Carbide Runners....6"
$79.95	Stud Boy Shaper Carbide Runners....7.5"
$89.95	Stud Boy Shaper Carbide Runners....9"
$89.00	Stud Boy "Deuce" Bar, Dual-Runners....4.5"
$99.00	Stud Boy "Deuce" Bar, Dual-Runners....6.5"
$140.00	Stud Boy "Deuce" Bar, Dual-Runners....9"

$1.40 ea	Stud Boy 'SPT' or Woody's 'Excel' carbide studs w/ standard aluminum backer (complete)
$1.50 ea	Stud Boy 'SPT' or Woody's 'Excel' carbide studs with 'Power Plate' backer (complete)
$1.08 ea	Stud Boy 'SPT' or Woody's Excel' carbide studs (studs & nuts only)
$1.75 ea	Stud Boy 'Power Point' Studs with standard aluminum backers (complete)
$1.85 ea	Stud Boy 'Power Point' Studs with 'Power Plate' backers (complete)
$1.50 ea	Stud Boy 'Power Point' Studs (studs and nuts only)

$1.60 ea	Woody's 'Traction Master' Studs (stud & nut only)
$1.85 ea	Woody's 'Traction Master' Studs with standard aluminum backer
$1.95 ea	Woody's 'Traction Master' Studs with 'Power Plate' backer
$1.32 ea	Woody's 'Mega Bite' Studs (stud & nut only)
$1.62 ea	Woody's 'Mega Bite' Studs with standard aluminum backer
$1.72 ea	Woody's 'Mega Bite' Studs with 'Power Plate' backer
(call)	Stainless Steel Studs Available
$.40 ea	Stud Boy 'Power Plate' backers (backers only, natural color) Colored 'Power Plate' aluminum backers also available in Blue/Green/Red/Purple....add $.35 over natural-colored Power Plate
SPT's and Excel's come in .875" / 1.00" / 1.075" / 1.080" & (1.175" in Woody's only) PowerPoints and Traction Master studs come in .875" / 1.00" / 1.075" / 1.080" / 1.175" / 1.187" / 1.325" / 1.5" / 1.625" / 1.750" sizes. See traction page for other Stainless Steel Studs, Ice Pixx, Assassains, Catapults, Chisels or Woody's Studs. Studding Notes: MCB recommends the 'Power Point' with the 'Power Plate' for all applications over 90HP. These studs have better penetration than the 'SPT' or 'Excel' stud. MCB recommends the 'Power Plate' backer for any application over 1.08" in length regardless of HP. The 'Power Plate' gives the stud much better support than the standard aluminum backer, less deflection results in less stress & potential tearing of your track. * For large volume orders of performance parts and/or traction products, further DISCOUNTS can be given on most items. Call us and we'll make you the best deal !