Yamaha RX-1
| $599.00 |
Power Tune Kit Convert your stock RX-1 into the unbeatable 4-stroke 1000cc that it should have been from the factory. Throttle response is vastly improved. Controlled testing has shown an improvement of 6-7 sledlengths in 600ft. Parts included: - MCB Custom Clutch Kit - RX-1 CV Slide Springs - K&N Filters - Main Jets - Installation and Tuning Instructions Items are available separately -but- they are highly recommended as a package |
| $200.00 | K&N
Air Filters and Snow Socks Requires Jetting and Needle adjustment changes |
| $39.95 | CV
Slide Springs Your RX-1 slides are vacuum operated; these springs allow for significant slide opening speeds, resulting in significant throttle response. |
| Traction and Control (Carbide Runners and Studs) | |
| $69.95 | Stud Boy Carbide Runners….9" G-Force |
| $52.95 | Stud Boy Carbide Runners….6" Switch-Back |
| $59.95 | Stud Boy Shaper Carbide Runners....4.5" |
| $69.95 | Stud Boy Shaper Carbide Runners....6" |
| $79.95 | Stud Boy Shaper Carbide Runners....7.5" |
| $89.95 | Stud Boy Shaper Carbide Runners....9" |
| $69.95 | Woody's Executive Carbide Runners….8" |
| $49.95 | Woody's Trail Blazer Carbide Runners….6" |
| $1.40 ea | Stud Boy 'SPT' or Woody's 'Excel' carbide studs w/ standard aluminum backer (complete) |
| $1.50 ea | Stud Boy 'SPT' or Woody's 'Excel' carbide studs with 'Power Plate' backer (complete) |
| $1.08 ea | Stud Boy 'SPT' or Woody's Excel' carbide studs (studs & nuts only) |
| $1.75 ea | Stud Boy 'Power Point' Studs with standard aluminum backers (complete) |
| $1.85 ea | Stud Boy 'Power Point' Studs with 'Power Plate' backers (complete) |
| $1.50 ea | Stud Boy 'Power Point' Studs (studs and nuts only) |
| $1.60 ea | Woody's 'Traction Master' Studs (stud & nut only) |
| $1.85 ea | Woody's 'Traction Master' Studs with standard aluminum backer |
| $1.95 ea | Woody's 'Traction Master' Studs with 'Power Plate' backer |
| $1.32 ea | Woody's 'Mega Bite' Studs (stud & nut only) |
| $1.62 ea | Woody's 'Mega Bite' Studs with standard aluminum backer |
| $1.72 ea | Woody's 'Mega Bite' Studs with 'Power Plate' backer |
| (call) | Stainless Steel Studs Available |
| $.40 ea | Stud Boy
'Power Plate' backers (backers only, natural color) Colored 'Power Plate' aluminum backers also available in Blue/Green/Red/Purple....add $.35 over natural-colored Power Plate |
SPT's and Excel's come in .875" / 1.00" / 1.075" / 1.080" & (1.175" in Woody's only) PowerPoints and Traction Master studs come in .875" / 1.00" / 1.075" / 1.080" / 1.175" / 1.187" / 1.325" / 1.5" / 1.625" / 1.750" sizes. See traction page for other Stainless Steel Studs, Ice Pixx, Assassains, Catapults, Chisels or Woody's Studs. Studding Notes: MCB recommends the 'Power Point' with the 'Power Plate' for all applications over 90HP. These studs have better penetration than the 'SPT' or 'Excel' stud. MCB recommends the 'Power Plate' backer for any application over 1.08" in length regardless of HP. The 'Power Plate' gives the stud much better support than the standard aluminum backer, less deflection results in less stress & potential tearing of your track. * For large volume orders of performance parts and/or traction products, further DISCOUNTS can be given on most items. Call us and we'll make you the best deal !
|
|