|
REV600 Engine Options |
|
$339.00 |
Dynoport Single
Pipe....+4 HP
Ceramic Coating available for an additional $100.00 |
|
$249.00 |
MBRP Silencer....8 lbs
weight reduction....stainless steel, P/N 1150000 |
|
$235.00 |
Dynoport Silencer....6 lbs
weight reduction |
| $260.00 |
V-Force Delta III Reeds |
| $225.00 |
MCB Moly-Coated OEM-Style Piston Kit
All MCB pistons are MOS2 coated;
proven to be the best for durability and lubricity. The piston material is
high silicone content to give the necessary hardness that aluminum pistons need.
The piston-tops are hard anodized for heat resistance and to minimize piston
expansion/contraction; this combined with the coating virtually eliminates the
possibility of cold seizure. All pistons are EXACT OEM dimensions and
mass, including ring grooves (we actually use OEM rings). These pistons
offer equal or BETTER than OEM performance at significantly less cost. All
kits include everything necessary to rebuild your sled. Pistons, rings,
wrist pins, circlips, and a complete gasket kit. |
|
|
|
| $325.00 |
"Beaver-Tail" Delete
Tunnel Extensions
GET RID OF THAT BEAVER-TAIL LOOK!! Kit
comes complete with everything needed to install; new tunnel section, '04
Snow-Flap, option of the '04 rectangular bumper or an '03 round Blair Morgan
bumper for those who may want to add teh '03 Blair Morgan plastic bumble-bee
tunnel trim cover, all necessary rivets and fasteners, new idler wheel
bolts, and new plastic idler wheel cover caps. Instructions are
included. Add $125 for the '03 Blair Morgan tunnel trim cover. |
|
|
|
| REV600 Clutching Options |
|
$279.95 |
SuperTorquer Heelclicker Kit (TRA)
The advantage of the Heelclicker is that it uses the steeper angles of the TRA clutch
sheaves, yet provides more efficient belt-squeeze at
the middle-to-upper
end, simliar to a Polaris, Arctic Cat, or Comet-style clutch. The Heelclicker
also gives you full adjustability of weight
placement, spring rates,
engagement, top-shift, and more, therefore making it practical for grass drags,
trail riding, lake racing, and
mountain riding. We have an excellent
setup for fast-trail and racing at sea level, moderate snow conditions. |
|
$299.95 |
Goodwin Clutch Kit |
|
$275.00 |
MCB Clutch Kit *Recommended*
MCB has extensively tested (on our OWN 600 REVs) and benchmarked all
clutch-kit manufacturers to develop what we feel is the BEST all-around
600-REV clutch kit. Please specify year when ordering. |
|
|
| $45.99 |
Ski-Doo Tunnel
Protection Kits....for 1.0" Tracks and 1.25" Tracks |
| $29.95 |
Standard Tunnel
Protection |
|
|
|
$79.00 |
SkiDoo OEM
Drive Belt....P/N 417-300-067 |
| $33.00 |
Amsoil Dominator Oil (Gallon) |
| $29.00 |
Amsoil Interceptor
Oil (Gallon) |
| $26.00 |
Amsoil HP Injector Oil
(Gallon) |
| |
|
| Traction and Control
(Carbide Runners and Studs) |
| $69.95 |
Stud Boy Carbide Runners….9" G-Force P/N
2153-00 |
| $49.95 |
Stud Boy Carbide Runners….6"
Switch-Back P/N 2152-00 |
| $59.95 |
Stud Boy Shaper Carbide Runners....4.5" |
| $69.95 |
Stud Boy Shaper Carbide
Runners....6" |
| $79.95 |
Stud Boy Shaper Carbide
Runners....7.5" |
| $89.95 |
Stud Boy Shaper Carbide
Runners....9" |
| $40.95 |
Stud Boy 4" for Precision
Skis....P/N 2255-00 |
| $49.95 |
Stud Boy 6" for Precision
Skis....P/N 2256-00 |
|
$89.00 |
Stud Boy "Deuce" Bar,
Dual-Runners....4.5" |
|
$99.00 |
Stud Boy "Deuce" Bar,
Dual-Runners....6.5" |
|
$140.00 |
Stud Boy "Deuce" Bar,
Dual-Runners....9" |
| |
|
| $1.40 ea |
Stud
Boy
'SPT' or Woody's
'Excel' carbide studs w/ standard aluminum backer (complete) |
| $1.50 ea |
Stud Boy 'SPT' or
Woody's 'Excel' carbide studs with 'Power Plate' backer (complete) |
| $1.08 ea |
Stud Boy 'SPT' or
Woody's Excel' carbide studs (studs & nuts only) |
| $1.75 ea |
Stud Boy 'Power Point' Studs with
standard aluminum backers (complete) |
| $1.85 ea |
Stud Boy 'Power Point' Studs with
'Power Plate' backers (complete) |
| $1.50 ea |
Stud Boy 'Power Point' Studs (studs
and nuts only) |
| |
|
| $1.60 ea |
Woody's 'Traction Master' Studs
(stud & nut only) |
| $1.85 ea |
Woody's 'Traction Master' Studs with
standard aluminum backer |
| $1.95 ea |
Woody's 'Traction Master' Studs with
'Power Plate' backer |
| $1.32 ea |
Woody's 'Mega Bite' Studs (stud & nut only) |
| $1.62 ea |
Woody's 'Mega Bite' Studs with
standard aluminum backer |
| $1.72 ea |
Woody's 'Mega Bite' Studs with
'Power Plate' backer |
| (call) |
Stainless Steel Studs Available |
| $.40 ea |
Stud Boy 'Power Plate' backers
(backers only, natural color)
Colored 'Power Plate' aluminum backers also available in Blue/Green/Red/Purple....add
$.35 over natural-colored Power Plate |
SPT's and Excel's come in .875" / 1.00" / 1.075" / 1.080" & (1.175" in Woody's only)
PowerPoints
and Traction Master studs come in .875" / 1.00" / 1.075" /
1.080" / 1.175" / 1.187" / 1.325" / 1.5" / 1.625" / 1.750" sizes.
See traction page for other Stainless Steel Studs, Ice Pixx,
Assassains, Catapults, Chisels or Woody's Studs.
Studding Notes: MCB recommends the 'Power Point' with the 'Power Plate' for
all applications over 90HP. These studs have better penetration than the 'SPT'
or 'Excel' stud. MCB recommends the 'Power Plate' backer for any application
over 1.08" in length regardless of HP. The 'Power Plate' gives the stud much
better support than the standard aluminum backer, less deflection results in
less stress & potential tearing of your track.
* For large volume orders
of performance parts and/or traction products, further DISCOUNTS can be given
on most items. Call us and we'll make you the best deal !
|