Ski Doo Mach Z 800 Performance Parts

Holtzman Engineering TempaFlow II
Automatic temperature-responding jetting adjustments for Non-DPM equipped models.

Combination packages receive additional discounts.
We've given you the menu, call to order the options you like.

SPT's and Excel's come in .875" / 1.00" / 1.075" / 1.080" & (1.175" in Woody's only)
PowerPoints and Traction Master studs come in .875" / 1.00" / 1.075" / 1.080" / 1.175" / 1.187" / 1.325" / 1.5" / 1.625" / 1.750" sizes.

See traction page for other Stainless Steel Studs, Ice Pixx, Assassains, Catapults, Chisels or Woody's Studs.

Studding Notes: MCB recommends the 'Power Point' with the 'Power Plate' for all applications over 90HP. These studs have better penetration than the 'SPT' or 'Excel' stud. MCB recommends the 'Power Plate' backer for any application over 1.08" in length regardless of HP. The 'Power Plate' gives the stud much better support than the standard aluminum backer, less deflection results in less stress & potential tearing of your track.

* For large volume orders of performance parts and/or traction products, further DISCOUNTS can be given on most items. Call us and we'll make you the best deal !

MachZ 800 Engine Options
$775.00	Dynoport Triple Pipes w/ Silencer....+10 HP @ 8500rpm If you own a '98 Mach Z, the addition of aftermarket pipes to your sled is a must. The center dump-pipe design that came on the '98s requires over 20 seconds at wide open throttle (WOT) to build the heat required for max HP. Add a set of Dynoport or PSI triple pipes, these pipes make considerably more HP much quicker / earlier than the stock pipe. The power is very broad and considerably stronger all through the low and midrange. On '99 and new models, it is still a significant +10HP gain over stock, but not quite as much as with the '98 design.
$239.00	Dynoport Triple Pak Silencer....10lb weight savings....(black)
$270.95	MBRP Silencer....(stainless center body)
$280.00	V-Force Delta III Reeds....+4-5 HP P/N V3S-120-3 Adds +4 to 5HP when combined with pipe/port/head
$320.00	Cheater Head & Cylinder Shim Kit....+8 HP @ 8500rpm Signifcant mid & topend gains without sacraficing bottom end, thanks to R.A.V.E. Requires you to send us your stock head as a core. No core purchases can be made for $320.00.
$600.00	Cylinder Porting....+8 HP
$275.00	MCB Moly-Coated OEM-Style Piston Kit All MCB pistons are MOS2 coated; proven to be the best for durability and lubricity. The piston material is high silicone content to give the necessary hardness that aluminum pistons need. The piston-tops are hard anodized for heat resistance and to minimize piston expansion/contraction; this combined with the coating virtually eliminates the possibility of cold seizure. All pistons are EXACT OEM dimensions and mass, including ring grooves (we actually use OEM rings). These pistons offer equal or BETTER than OEM performance at significantly less cost. All kits include everything necessary to rebuild your sled. Pistons, rings, wrist pins, circlips, and a complete gasket kit.
$525.00 ($165.00 Bottle-only)	Holtzman Nitrous (NOS) Kit 45 instant HP!! NOS airbox-injected for safe and reliable HP. Bottle pressure is not determined by bottle-temperature. Constant pressure at all times. Fuel Jets $20.00 each, specify Carb or EFI.
$159.00	Holtzman Engineering TempaFlow II Automatic temperature-responding jetting adjustments for Non-DPM equipped models.
$210.00	Holtzman ATAAC....Temperature and Altitude automatic compensation all-in-one
$150.00	Holtzman Engineering Variflow Multi-Range Manual jetting adjustment tunable from the handlebar for altitude changes.

MachZ 800 Clutching Options
$249.95	SuperTorquer Heelclicker Kit (TRA) The advantage of the Heelclicker is that it uses the steeper angles of the TRA clutch sheaves, yet provides more efficient belt-squeeze at the middle-to-upper end, simliar to a Polaris, Arctic Cat, or Comet-style clutch. The Heelclicker also gives you full adjustability of weight placement, spring rates, engagement, top-shift, and more, therefore making it practical for grass drags, trail riding, lake racing, and mountain riding. We have an excellent setup for fast-trail and racing at sea level, moderate snow conditions.
$179.00	EPI Trail Clutch Kit
$374.00	Team Roller Clutch & Clutch Kit The Team Roller Clutch eliminates "clutch binding" as seen on the stock SkiDoo secondary. The encapsulated design does not allow the moveable sheave to wobble, therefore eliminating bind, making upshift and backshift considerably smoother and more efficient (allows for full shift-out). Includes base clutch and clutch-kit, ready to bolt-on..

Combination packages receive additional discounts. We've given you the menu, call to order the options you like.
$45.99	Ski-Doo Tunnel Protection Kits....for 1.0" Tracks and 1.25" Tracks
$29.95	Standard Tunnel Protection

$65.95	SkiDoo OEM Drive Belt....P/N 417-300-066
$33.00	Amsoil Dominator Oil (Gallon)
$29.00	Amsoil Interceptor Oil (Gallon)
$26.00	Amsoil HP Injector Oil (Gallon)

Traction and Control (Carbide Runners and Studs)
$69.95	Stud Boy Carbide Runners….9" G-Force P/N 2153-00
$49.95	Stud Boy Carbide Runners….6" Switch-Back P/N 2152-00
$59.95	Stud Boy Shaper Carbide Runners....4.5"
$69.95	Stud Boy Shaper Carbide Runners....6"
$79.95	Stud Boy Shaper Carbide Runners....7.5"
$89.95	Stud Boy Shaper Carbide Runners....9"
$40.95	Stud Boy 4" for Precision Skis....P/N 2255-00
$49.95	Stud Boy 6" for Precision Skis....P/N 2256-00
$89.00	Stud Boy "Deuce" Bar, Dual-Runners....4.5"
$99.00	Stud Boy "Deuce" Bar, Dual-Runners....6.5"
$140.00	Stud Boy "Deuce" Bar, Dual-Runners....9"

$1.40 ea	Stud Boy 'SPT' or Woody's 'Excel' carbide studs w/ standard aluminum backer (complete)
$1.50 ea	Stud Boy 'SPT' or Woody's 'Excel' carbide studs with 'Power Plate' backer (complete)
$1.08 ea	Stud Boy 'SPT' or Woody's Excel' carbide studs (studs & nuts only)
$1.75 ea	Stud Boy 'Power Point' Studs with standard aluminum backers (complete)
$1.85 ea	Stud Boy 'Power Point' Studs with 'Power Plate' backers (complete)
$1.50 ea	Stud Boy 'Power Point' Studs (studs and nuts only)

$1.60 ea	Woody's 'Traction Master' Studs (stud & nut only)
$1.85 ea	Woody's 'Traction Master' Studs with standard aluminum backer
$1.95 ea	Woody's 'Traction Master' Studs with 'Power Plate' backer
$1.32 ea	Woody's 'Mega Bite' Studs (stud & nut only)
$1.62 ea	Woody's 'Mega Bite' Studs with standard aluminum backer
$1.72 ea	Woody's 'Mega Bite' Studs with 'Power Plate' backer
(call)	Stainless Steel Studs Available
$.40 ea	Stud Boy 'Power Plate' backers (backers only, natural color) Colored 'Power Plate' aluminum backers also available in Blue/Green/Red/Purple....add $.35 over natural-colored Power Plate
SPT's and Excel's come in .875" / 1.00" / 1.075" / 1.080" & (1.175" in Woody's only) PowerPoints and Traction Master studs come in .875" / 1.00" / 1.075" / 1.080" / 1.175" / 1.187" / 1.325" / 1.5" / 1.625" / 1.750" sizes. See traction page for other Stainless Steel Studs, Ice Pixx, Assassains, Catapults, Chisels or Woody's Studs. Studding Notes: MCB recommends the 'Power Point' with the 'Power Plate' for all applications over 90HP. These studs have better penetration than the 'SPT' or 'Excel' stud. MCB recommends the 'Power Plate' backer for any application over 1.08" in length regardless of HP. The 'Power Plate' gives the stud much better support than the standard aluminum backer, less deflection results in less stress & potential tearing of your track. * For large volume orders of performance parts and/or traction products, further DISCOUNTS can be given on most items. Call us and we'll make you the best deal !